Re: iSCSI:draft-ietf-ips-iscsi-reqmts-00.txt

[Matt Wakeley <matt_wakeley@agilent.com>]

Marjorie,

In the draft-ietf-ips-iscsi-reqmts-00.txt document you have the following:

Consider that a network pipe at 10 Gbps . 200 msec holds 250 MB.
[Assume land-based communication with a spot half way around the
world at the equator. Ignore additional distance due to cable
routing. Ignore repeater and switching delays; consider only a
speed-of-light delay of 5 .sec / km. The circumference of the globe
at the equator is approx. 40000 km (we need to consider round-trip
delay to keep the pipe full). 10 Gb/sec . 40000 km . 5 .sec / km . B
/ 8b = 250 MB].


There seem to be a lot of dots "." - were you perhaps using non-ascii
characters that did not translate to ascii text?  For example, I think the "5
.sec / km" should be "5 nsec / km" ?