|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: opcodesJP, I've tried to make some order -regular commands 00-0f -regular reponses 40 - 4f -one way 10-1f/50-5f etc. I am open to suggestions. I was recently asked what pimary SCSI comands are followed by data (write or control) and to my dismay I found there is no easy test (except a translate table). The day when that was possible are gone... (and I did not like it). Regards, Julo Raghavendra Rao <jpr@divyaroot.India.Sun.COM> on 01/12/2000 00:10:13 Please respond to Raghavendra Rao <jpr@divyaroot.India.Sun.COM> To: Julian Satran/Haifa/IBM@IBMIL cc: Subject: opcodes Julian, I noticed some jugglery of opcode values in the last couple of revisions compared the older spec. I expected either holes or a contiguous reorder, but I see neither. I see RTT value changing from 0x46 to 0x50, as well holes at 0x48 and 0x49. Anyway, it would be useful to have them contiguous, Is that possible ? Thanks. -JP
Home Last updated: Tue Sep 04 01:06:15 2001 6315 messages in chronological order |