SORT BY:

LIST ORDER
THREAD
AUTHOR
SUBJECT


SEARCH

IPS HOME


    [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

    Fwd: I-D ACTION:draft-bakke-iscsi-slp-00.txt


    • To: IPS <ips@ece.cmu.edu>
    • Subject: Fwd: I-D ACTION:draft-bakke-iscsi-slp-00.txt
    • From: Mark Bakke <mbakke@cisco.com>
    • Date: Wed, 28 Feb 2001 09:44:04 -0600
    • Content-Transfer-Encoding: 7bit
    • Content-Type: text/plain; charset=us-ascii
    • Sender: owner-ips@ece.cmu.edu

    > A New Internet-Draft is available from the on-line Internet-Drafts directories.
    > 
    > 
    >         Title           : Finding iSCSI Targets and Name Servers Using SLP
    >         Author(s)       : M. Bakke et al.
    >         Filename        : draft-bakke-iscsi-slp-00.txt
    >         Pages           : 17
    >         Date            : 23-Feb-01
    >         
    > The iSCSI protocol provides a way for hosts to access SCSI devices
    > over an IP network.  This document defines the use of the Service
    > Location Protocol (SLP) by iSCSI hosts, devices, and name services,
    > along with the SLP service type templates that describe the services
    > they provide.
    > 
    > A URL for this Internet-Draft is:
    > http://www.ietf.org/internet-drafts/draft-bakke-iscsi-slp-00.txt
    > 
    > Internet-Drafts are also available by anonymous FTP. Login with the username
    > "anonymous" and a password of your e-mail address. After logging in,
    > type "cd internet-drafts" and then
    >         "get draft-bakke-iscsi-slp-00.txt".
    > 
    > A list of Internet-Drafts directories can be found in
    > http://www.ietf.org/shadow.html 
    > or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
    > 
    > 
    > Internet-Drafts can also be obtained by e-mail.
    > 
    > Send a message to:
    >         mailserv@ietf.org.
    > In the body type:
    >         "FILE /internet-drafts/draft-bakke-iscsi-slp-00.txt".
    >         
    > NOTE:   The mail server at ietf.org can return the document in
    >         MIME-encoded form by using the "mpack" utility.  To use this
    >         feature, insert the command "ENCODING mime" before the "FILE"
    >         command.  To decode the response(s), you will need "munpack" or
    >         a MIME-compliant mail reader.  Different MIME-compliant mail readers
    >         exhibit different behavior, especially when dealing with
    >         "multipart" MIME messages (i.e. documents which have been split
    >         up into multiple messages), so check your local documentation on
    >         how to manipulate these messages.
    
    
    -- 
    Mark A. Bakke
    Cisco Systems
    mbakke@cisco.com
    763.398.1054
    


Home

Last updated: Tue Sep 04 01:05:30 2001
6315 messages in chronological order