RE: iSCSI-06 SCSI Cmd typo

[Sandeep Joshi <sandeepj@research.bell-labs.com>]

I dont believe any field was removed.  The format is fine and
can accomodate all fields.  The byte position for Initiator task 
tag was mentioned as 24 instead of 20 in 05 & 06.  That caused 
the initial comment.

Read as =>
"initiator task tag" at 16.
"expected data length" at 20.
"cmdSN" at 24.
"expStatSN" at 28.
"CDB" at 32 and upto 48.

-Sandeep

> Julian,
>
>   I'm confused as to what field was removed in order to make
>   the CDB field 16 bytes and locate the CmdSN at offset 24.
>   Can you send the correct layout of the SCSI Command PDU
>   when you get time?
>
> Thank You
>
> chuck micalizzi
>
> -----Original Message-----
> From: julian_satran@il.ibm.com [mailto:julian_satran@il.ibm.com]
> Sent: Tuesday, April 24, 2001 2:18 AM
> To: dfsmith@almaden.ibm.com
> Cc: ips@ece.cmu.edu
> Subject: Re: iSCSI-06 SCSI Cmd typo
>
> Thanks Daniel,
>
> It's fixed. CmdSN is at 24 and  the following are shifted.
>
> Daniel Smith <dfsmith@almaden.ibm.com> on 24/04/2001 03:16:31
>
> Please respond to Daniel Smith <dfsmith@almaden.ibm.com>
>
> To:	Julian Satran/Haifa/IBM@IBMIL
> cc:
> Subject:  iSCSI-06 SCSI Cmd typo
>
>
> In section 2.3 SCSI Command...
>
> the table shows bytes 36--47 reserved for the CDB (12 bytes).
> But
> the description 2.3.6 says it's 16 bytes.
>
> (I'd prefer 16 bytes---I'm not a big fan of Stat/DataSN.)
>
> This document is getting big---but the latest version seems to be holding
> up
> well as I read through it.  Good work.
>
> Daniel
> --
> IBM Almaden Research Center, 650 Harry Road, San Jose, CA 95120-6099, USA
> K65B/C2 Phone: +1(408)927-2072 Fax: +1(408)927-3010 Home: +1(408)227-5786