|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: SAM-2 w/ multiple portsSandeep, The responses to your questions about the SAM-2 multi-port model are as follows: > 1) "..Any task that is sent to a logical unit that is not known > to the task router shall be routed to the default logical > unit (e.g. LUN 0). > > This seems to conflict with the contents of Sec 5.8.3 (Incorrect > LU selection). What is the rationale behind this statement ? The Task Router cannot form the response to incorrect logical unit selection that is described in 5.8.3. Therefore, the Task Router is obliged to route the task to the default logical unit, who can form the response. > 2) "Any task management function that is > not sent to a specific logical unit shall be broadcast to > all logical units known to the task router" > > Isnt this already covered under specific task functions anyways > or is it intended to address some new functionality ? The mechanism described is present to provide the routing necessary to effect the requirements stated in the specific task management function descriptions. In summary, the routing requirements in question are present to make the Task Router an operative participant in existing SCSI model requirements, not to instantiate new requirements. Thanks. Ralph...
Home Last updated: Tue Sep 04 01:04:32 2001 6315 messages in chronological order |