|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: iSCSI padding should be 0Perhaps we should say MUST be sent as 0 and keep quiet about what the receiver should do (check for 0 - we don't want that). Thanks,Julo "Eddy Quicksall" <eddy_quicksall@ivivity.com> on 27-07-2001 18:18:33 Please respond to eddy_quicksall@ivivity.com To: Julian Satran/Haifa/IBM@IBMIL, ips@ece.cmu.edu cc: Subject: iSCSI padding should be 0 Julian, Section 2.1 says the padding should be 0. I guess that is correct because one may not use CRC and therefore may not want to set them to 0. Wouldn't it be better if section 2.1 was more specific and mentioned when they must be 0 if there is a CRC. Also, I noticed at the UNH plug fest that at least one person thought "should" meant "must". Therefore, I don't think it should say "should" ... I think it should not mention the 0'ness unless there is a CRC present. Also, transmission. Padding bytes, when presents in a segment covered by a CRC, have to be set to 0 and are included in the CRC. should say "when present in". Eddy_Quicksall@iVivity.com
Home Last updated: Tue Sep 04 01:04:11 2001 6315 messages in chronological order |