Re: iSCSI: [Fwd: Crc-32c example in iSCSI spec]

[Mark Bakke <mbakke@cisco.com>]

Julian Satran wrote:
> 
> Mark,
> 
> I appologize - since I built the examples I just transcribed the results
> and the data from two different runs.
> They value used are 1f to 0 and not ff to e0.

OK; when I use 1f..00 my CRC matches yours.

--
Mark

> 
> Julo
> 
> Mark Bakke <mbakke@cisco.com>@cisco.com on 20-08-2001 17:03:50
> 
> Please respond to Mark Bakke <mbakke@cisco.com>
> 
> Sent by:  mbakke@cisco.com
> 
> To:   Julian Satran/Haifa/IBM@IBMIL
> cc:
> Subject:  Re: iSCSI: [Fwd: Crc-32c example in iSCSI spec]
> 
> Julian-
> 
> I have to run out for a while, so I'll look at the rest of the
> message later today.  I noticed that you've added a new example,
> but when I run it through my generator I get a different CRC.
> 
> Julian Satran wrote:
> 
> >    32 bytes of decrementing ff..e0:
> >
> >      Byte:        0  1  2  3
> >
> >         0:       ff fe fd fc
> >       ...
> >        28:       e3 e2 e1 e0
> >
> >       CRC:       5c db 3f 11
> 
> I get   CRC:       a7 e4 e4 ae
> 
> --
> Mark A. Bakke
> Cisco Systems
> mbakke@cisco.com
> 763.398.1054

-- 
Mark A. Bakke
Cisco Systems
mbakke@cisco.com
763.398.1054