|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] questions/suggestions on <draft-ietf-ips-fcovertcpip-06.txt>Hi, I am new member of this group. I just now went thru the FCIP draft. Have some questions and suggestions about. I am very new to this so please correct me if I have written anything wrong. 1. section 4->4) Class 1 FC frames( and some signals) are not transmitted across an FCIP link. Since purpose of FCIP is to replace end-to-end fiber. So, how these frames will be transfered ? 2. section 5.2 , fig.2 FCIP Link Model is little bit confusing. Instead of writing FCIP on one side and Link on other side, it will be good if FCIP Link is written both side. 3. section 5.6.2.1 and 5.6.2.2. If someone is doing TCP checksum validation, is it required to do 5.6.2.2 checks ? At least test j) is not required ? 4. Once TCP payload will have only one FC frame or it can have multiple FC frame ? Its not mentioned anywhere, but from the section 5.6.2.2 and 5.6.2.3 it seems to me that it can have multiple FC frame ? -suman ==================================== Suman Sharma Sr. Network Software Engineer Access & Switching Processor Division (ASPD) Intel Corporation Phone: (408)545-6287 mailto:suman.sharma@intel.com
Home Last updated: Mon Oct 15 19:17:27 2001 7243 messages in chronological order |