|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: iSCSI: ImmediateData & InitialR2TThe text doesn't say these are connection specific, so they must be session specific. Connection 1 logs in and doesn't send the ImmediateData key because it wants to use the default "yes". If connection 2 sends ImmediateData=no and the target agrees to that, how is this going to affect connection 1 which thinks it can send immediate data, and may actually have data in flight to the target. I think these two keys should have the same use restrictions as DataPDULength, FirstBurstSize, and MaxBurstSize, all have Use:LO. -Ayman > -----Original Message----- > From: owner-ips@ece.cmu.edu [mailto:owner-ips@ece.cmu.edu]On Behalf Of > Julian Satran > Sent: Friday, October 05, 2001 4:24 AM > To: ips@ece.cmu.edu > Subject: Re: iSCSI: ImmediateData & InitialR2T > > > > why ? Julo > > > > > "Ayman Ghanem" > > <aghanem@cisco To: > <ips@ece.cmu.edu> > .com> cc: > > Sent by: Subject: iSCSI: > ImmediateData & InitialR2T > owner-ips@ece. > > cmu.edu > > > > > > 04-10-01 17:42 > > Please respond > > to "Ayman > > Ghanem" > > > > > > > > > Julian, > > The use of these two keys is currently set to "Use: ALL". I think they > should be allowed only on the leading connection, so a second connection > can > not change them on the first. > > -Ayman > > > > > >
Home Last updated: Sat Oct 06 03:17:26 2001 7089 messages in chronological order |