|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: iSCSI: scope of keysJohn, I think my point was missed. Now you have possibly pointed out another angle to my point. My point is that "use" does not contain enough information. In your response below, you have implied that IO now means "required" ... but it does not. I think that "use" has been overloaded and I think each key should have a list of properties (use is one, scope is another and now maybe required should be a third). Eddy -----Original Message----- From: John Hufferd [mailto:hufferd@us.ibm.com] Sent: Friday, December 21, 2001 1:05 AM To: Eddy Quicksall Cc: Julian Satran; ips@ece.cmu.edu Subject: RE: iSCSI: scope of keys Eddy, It not only OK, it is required. . . . John L. Hufferd Senior Technical Staff Member (STSM) IBM/SSG San Jose Ca Main Office (408) 256-0403, Tie: 276-0403, eFax: (408) 904-4688 Home Office (408) 997-6136, Cell: (408) 499-9702 Internet address: hufferd@us.ibm.com "Eddy Quicksall" <Eddy_Quicksall@ivivity.com>@ece.cmu.edu on 12/18/2001 07:25:44 AM Sent by: owner-ips@ece.cmu.edu To: Julian Satran/Haifa/IBM@IBMIL, <ips@ece.cmu.edu> cc: Subject: RE: iSCSI: scope of keys IO means "only during login". It does not mean "connection only". 13 TargetName Use: IO by initiator ALL by target, Declarative This key must be provided by the initiator of the TCP connection to the remote endpoint in the first login request ... So, here is a case where it is session wide ... so IO cannot mean "connection only" (I assume that since TargetName is not LO, then it must be ok to send this key for each connection). Eddy -----Original Message----- From: Julian Satran [mailto:Julian_Satran@il.ibm.com] Sent: Friday, December 14, 2001 3:50 PM To: ips@ece.cmu.edu Subject: Re: iSCSI: scope of keys Eddy, I think the text says it - but if people love headers better I can add it (some voices needed). Julo "Eddy Quicksall" <Eddy_Quicksall@ivivity.com> Sent by: owner-ips@ece.cmu.edu 14-12-01 22:12 To: "ips@ece. cmu. edu \(E-mail\)" <ips@ece.cmu.edu> cc: Subject: iSCSI: scope of keys Would it make sense to add a "scope" to each key definition? The IO and LO "use:" labels almost do that but not in all cases. For example: SW = Session wide CO = Connection only Use: IO Who can send: Initiator Scope: SW Key=<value> Eddy
Home Last updated: Sat Dec 22 21:19:19 2001 8197 messages in chronological order |