|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: iSCSI:Time2RetainJohn, The intent of the parametrs is the same and we will fix the wording to say it. Thanks, Julo John Hufferd@IBMUS To: Julian Satran/Haifa/IBM@IBMIL@IBMDE cc: ips@ece.cmu.edu 30-12-01 05:54 From: John Hufferd/San Jose/IBM@IBMUS Subject: iSCSI:Time2Retain Julian, I am wondering if we have a minor discrepancy between the Asynchronous Message PDU and the Logout Response PDU. The Asynchronous Message Parameter3 is the "Time2Retain" variable, and it is the maximum time to reconnect after the initial wait (Parameter2) which is the "Time2Wait". The Logout Response PDU has both the "Time2Wait" and the "Time2Retain" but the "Time2Retain" is defined as the "maximum time that the target waits for a connection reinstatement Login after which the connection state is discarded", and that definition makes no reference to the "Time2Wait". Since Both "Time2Wait" and "Time2Retain" are specified in both PDUs, the question is: did we intend in the Logout Response PDU to have no relation between the two values, and did we intend the two Commands to have different interpretations of the "Time2Retain" variable? . . . John L. Hufferd Senior Technical Staff Member (STSM) IBM/SSG San Jose Ca Main Office (408) 256-0403, Tie: 276-0403, eFax: (408) 904-4688 Home Office (408) 997-6136, Cell: (408) 499-9702 Internet address: hufferd@us.ibm.com
Home Last updated: Sun Dec 30 18:17:50 2001 8225 messages in chronological order |