RE: iSCSI: RefCmdSN != CmdSN

[Eddy Quicksall <Eddy_Quicksall@ivivity.com>]

Yes, but I don't think the statement "Targets however must consider ..." is
necessary because the initiator must always make them consistent and it is a
target implementation issue as to which it actually uses.


Eddy

-----Original Message-----
From: Mallikarjun C. [mailto:cbm@rose.hp.com]
Sent: Thursday, February 28, 2002 8:47 PM
To: ips@ece. cmu. edu (E-mail)
Subject: Re: iSCSI: RefCmdSN != CmdSN


Eddy,

I agree that targets don't have to check both always, only when it
is needed.

The intended role of RefCmdSN is to help identify the right command
when the command to be aborted had not arrived - the command
could be lost due to digest errors or as part of connection failure.
So I think the quoted text should be rephrased to:

Section 9.5.4
For the ABORT TASK function, initiators MUST always set this to the
CmdSN of the task identified by the Initiator Task Tag field.  Targets
however
must consider the field valid only when the task indicated by the Initiator
Task Tag field does not exist.

Section 9.6.1
For the ABORT TASK function,
    a) if the ITT identifies a valid task leading to a successful
termination,
        targets must return the "Function complete" response.
    b)if the ITT does not identify an existing task but if the CmdSN
indicated
       by the RefCmdSN field in the task management function request is
within
       the valid CmdSN window, targets must consider the CmdSN received
       and return the "Function complete" response.
   c) if the ITT does not identify an existing task and if the CmdSN
indicated
       by the RefCmdSN field in the task management function request is
outside
       the valid CmdSN window, targets must return the "Task does not exist"
response.

Comments?
--
Mallikarjun

Mallikarjun Chadalapaka
Networked Storage Architecture
Network Storage Solutions Organization
Hewlett-Packard MS 5668
Roseville CA 95747

----- Original Message -----
From: "Eddy Quicksall" <Eddy_Quicksall@ivivity.com>
To: "ips@ece. cmu. edu (E-mail)" <ips@ece.cmu.edu>
Sent: Thursday, February 28, 2002 4:46 PM
Subject: iSCSI: RefCmdSN != CmdSN


> Is there a reason that this check is mandated? Is there a case where this
> can happen with bug free code?
>
>  If RefCmdSN does not match the CmdSN of the command to be aborted at the
>  target, the abort action MUST NOT be performed and the response MUST
>  be 'function rejected'.
>
>
> Eddy_Quicksall@iVivity.com
>