Re: SendTarget Options in UNH v-.11 code.

[Ullas Ponnadi <uponnadi@cup.hp.com>]

Hi Shesha,

   I am assuming that you are using the latest version ( ref13_06 ) which has
support for ver 11 also. By default, the target will send response to
SendTargets
during the discovery phase. At the initiator end, you will have to look at the
response and construct information about targets.

   Hope that helps.

Regards,

Ullas




shesha bhushan wrote:

> Hi Robert,
>   I agree with what you say. So what should I do to get the information
> about the targets. What command should I have to issue at the shell ?
>
> Thanking You
> Shesha
>
> >From: "Robert D. Russell" <rdr@io.iol.unh.edu>
> >To: shesha bhushan <bhushan_vadulas@hotmail.com>
> >CC: cdeng@iol.unh.edu, <qtao@iol.unh.edu>, <ips@ece.cmu.edu>
> >Subject: Re: SendTarget Options in UNH v-.11 code.
> >Date: Sat, 24 Aug 2002 09:49:45 -0400 (EDT)
> >
> >Hi Shesha:
> >
> >There is no problem to be fixed here -- everything is performing exactly
> >as it is supposed to!
> >
> >According to the standard, the SendTargets key can ONLY be sent during
> >Full Feature Phase.  Therefore, when the initiator sends it during
> >login (because of the iscsi_manage command you used), the target
> >correctly gives an error and terminates the login.  The initiator,
> >upon receiving the Login error response, also terminates the login
> >and reports the error at the shell level.
> >Nothing to fix -- what were you thinking should happen?
> >
> >Best,
> >Bob Russell
> >
> >
> >On Sat, 24 Aug 2002, shesha bhushan wrote:
> >
> > > Hi,
> > >   I am using UNH iSCSI code on Redhat Linux boxes. How to specify the
> > > "SendTarget" options at the initiator. If I specify as manage parameters
> > > (./iscsi_manage InitiatorName=abc TargetName=xyz SendTargets=all host=0)
> > > then at the target side it gives the following error ....
> > >
> > >
> >--------------------------------------------------------------------------
> > > Aug 23 20:32:04 kernel: 1287: Got key: SendTargets=all
> > > Aug 23 20:32:04 kernel:
> >../common/text_param.h:scan_input_and_process:2411:
> > > ***ERROR*** SendTargets can only be used in full feature phase
> > >
> >--------------------------------------------------------------------------
> > >
> > > Now at the initiator side it gives the followimg error at shell
> > >
> > > /proc/scsi/iscsi_initiator/0: Software caused connection abort
> > >
> > >
> > > and the error that is logged in /var/log/message is
> > >
> > > -----------------------------------------------------------------------
> > >
> > > Aug 23 20:50:44 kernel:
> >../common/text_param.h:check_login_response:1848:
> > > ***ERROR*** Login Response with StatusClass 0x02, StatusDetail 0x00
> > >
> > > Aug 23 20:50:44 kernel: 3702: parameter negotiation failed
> > > -----------------------------------------------------------------------
> > >
> > > How can I fix this problem. Please advice.
> > >
> > > Thanks
> > > Shesha
> > >
> > >
> > >
> > >
> > >
> > > _________________________________________________________________
> > > MSN Photos is the easiest way to share and print your photos:
> > > http://photos.msn.com/support/worldwide.aspx
> > >
> >
>
> _________________________________________________________________
> MSN Photos is the easiest way to share and print your photos:
> http://photos.msn.com/support/worldwide.aspx