RE: iSCSI: LUN in a ping

[Eddy Quicksall <eddy_quicksall@ivivity.com>]

For that, wouldn't the target generate REPORTED LUNS DATA HAS CHANGED
(3F/0E)?

It is my opinion that this is just another requirement that has been put on
the target for no good reason.

It should be up to the target as to if the LUN field has meaning and the
initiator should be the one that has a requirement to echo the value.

Eddy

-----Original Message-----
From: Rod Harrison [mailto:rod.harrison@windriver.com]
Sent: Wednesday, January 22, 2003 1:52 PM
To: Eddy Quicksall; Julian Satran; ips@ece.cmu.edu
Subject: RE: iSCSI: LUN in a ping



The initiator might try to rediscover the LUN topology if it sees a NOP from
a
LUN that it previously thought was not present.

- Rod

-----Original Message-----
From: owner-ips@ece.cmu.edu [mailto:owner-ips@ece.cmu.edu]On Behalf Of
Eddy Quicksall
Sent: Wednesday, January 22, 2003 10:28 AM
To: Julian Satran; Eddy Quicksall; ips@ece.cmu.edu
Subject: RE: iSCSI: LUN in a ping


Yes, I remember that but the necessity for the target to set it should be up
to the target because the initiator should not be trying to interpret it (it
should only be required to echo it).

Is there a case where the initiator will interpret the LUN?

Eddy

-----Original Message-----
From: Julian Satran [mailto:julian@cs.haifa.ac.il]
Sent: Wednesday, January 22, 2003 12:43 AM
To: 'Eddy Quicksall'; ips@ece.cmu.edu
Subject: RE: iSCSI: LUN in a ping


TTT & LUN uniquely identify the "origin" (if target is a "composite"
each of the parts can issue their own TTTs - no coordination needed).

Regards,
Julo


-----Original Message-----
From: owner-ips@ece.cmu.edu [mailto:owner-ips@ece.cmu.edu] On Behalf Of
Eddy Quicksall
Sent: 22 January, 2003 00:07
To: ips@ece.cmu.edu
Subject: iSCSI: LUN in a ping


Does anyone know why we added "the LUN must be valid" for a target
initiated ping? It would seem that it is N/A when the ping is just being
used to checkup on the connection.

What will the initiator do with the LUN anyway?

10.19.3 LUN
A LUN MUST be set to a correct value when the Target Transfer Tag is
valid (not the reserved value 0xffffffff).

Eddy
mailto: Eddy_Quicksall@iVivity.com