|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Error recovery level 2 QuestionJulian, Assume that I have a multi-connection session to a target when one of the connections fails. What is the completion of the following diagram (assume 8K PDUs and maxBurst = 64K): Initiator Target ---------- --------- Write Cmd (64K no Immediate) ---> <--- R2T Offset 0, len=64K Data PDU (8K DataSN 0) ---> Data PDU (8K DataSN 1) ---> --- Connection Lost --- On 2nd connection: Logout (for recovery) ---> <--- Logout Response Task Mgnt (Reassign) ---> <--- Task Mgnt Response - OK What Comes Next? Is a recovery R2T expected from the target? or does the Initiator continue to send data PDUs to the target? If the initiator continues to send, what is the proper place to continue. I may have submitted several PDUs to the stack that were never received before the connection loss was detected. The read request seems fairly straight forward, but the write case is not clear (at least to me...) Thanks for any help, Kevin Lemay
Home Last updated: Wed Mar 05 09:19:12 2003 12393 messages in chronological order |