RE: I-D ACTION:draft-ietf-ips-iscsi-boot-00.txt

["Mehra, Pankaj" <pankaj.mehra@compaq.com>]

The draft draft-ietf-ips-iscsi-boot-00.txt refers to the much older RLP
(which dates back to 1983) rather than the more up-to-date (ca. 1999)
service location protocol version 2 (SLPv2). This is relevant because the
format of the "file" field in the DHCPv4/BOOTP headers fits nicely within
the framework of service URLs.

In fact, if the booting host were to simply behave like an SLP UA looking
for "iscsi:*" URLs, then it would not need to do anything special to satisfy
all of the requirements set forth for this draft.

The SLP drafts are standards track so it does not make sense to keep
reinventing the service location infrastructure.

Pankaj Mehra, Compaq Tandem Labs,
19333 Vallco Parkway, CAC 1-27, Cupertino, CA 95014
(408)285-1823 (voice)           (408)285-1819 (FAX)


-----Original Message-----
From: Internet-Drafts@ietf.org [mailto:Internet-Drafts@ietf.org]
Sent: Wednesday, 22 November, 2000 3:04 AM
Cc: ips@ece.cmu.edu
Subject: I-D ACTION:draft-ietf-ips-iscsi-boot-00.txt


A New Internet-Draft is available from the on-line Internet-Drafts
directories.
This draft is a work item of the IP Storage Working Group of the IETF.

	Title		: A Standard for BootStrapping Clients using the
iSCSI 
                          Protocol
	Author(s)	: P. Sarkar, D. Missimer, C. Sapuntzakis
	Filename	: draft-ietf-ips-iscsi-boot-00.txt
	Pages		: 7
	Date		: 21-Nov-00
	
The Small Computer Systems Interface (SCSI) is a popular family of
protocols for communicating with I/O devices, especially storage
devices.  iSCSI is a proposed transport protocol for SCSI that
operates on top of TCP[12].  This memo describes a standard mechanism
to enable clients to bootstrap themselves using the iSCSI protocol.
The goal of this standard is to enable clients to obtain the
information to open an iSCSI session with the iSCSI bootstrpping
server, assuming this information is not available.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-ips-iscsi-boot-00.txt

Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-ietf-ips-iscsi-boot-00.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-ietf-ips-iscsi-boot-00.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.