Re: iSCSI:- SCSI response Flags

[julian_satran@il.ibm.com]

thanks - julo

"Sanjeev Bhagat (TRIPACE/Zoetermeer)" <sbhagat@tripace.com> on 11-06-2001
18:14:03

Please respond to "Sanjeev Bhagat (TRIPACE/Zoetermeer)"
      <sbhagat@tripace.com>

To:   Julian Satran/Haifa/IBM@IBMIL, "'ISCSI'" <ips@ece.cmu.edu>
cc:
Subject:  iSCSI:- SCSI response Flags





there is some mistake in definition of flags byte in SCSI Response

Current definition says
b3 (u) same as b0 but for the read-part of a bi-directional  operation

b4 (o) same as b1 but for the read-part of a bi-directional operation

it should be

b3 (u) same as b1 but for the read-part of a bi-directional  operation

b4 (o) same as b2 but for the read-part of a bi-directional operation

Also the line

Bits O and U are mutually exclusive and so are bits o and u.  For a
response
(S=0) b0-b3 MUST be 0.

should change to

Bits O and U are mutually exclusive and so are bits o and u.  For a
response
(S=0) b1-b4 MUST be 0.

or

Bits O and U are mutually exclusive and so are bits o and u.  For a
response
(S=0) b0-b4 MUST be 0.



Regards,

Sanjeev




 - att1.htm