iSCSI:- SCSI response Flags

["Sanjeev Bhagat (TRIPACE/Zoetermeer)" <sbhagat@tripace.com>]

 

there is some mistake in definition of flags byte in SCSI Response

 

Current definition says

b3 (u) same as b0 but for the read-part of a bi-directional  operation

b4 (o) same as b1 but for the read-part of a bi-directional operation

it should be

b3 (u) same as b1 but for the read-part of a bi-directional  operation

b4 (o) same as b2 but for the read-part of a bi-directional operation

Also the line

Bits O and U are mutually exclusive and so are bits o and u.  For a response (S=0) b0-b3 MUST be 0.

should change to

Bits O and U are mutually exclusive and so are bits o and u.  For a response (S=0) b1-b4 MUST be 0.

or

Bits O and U are mutually exclusive and so are bits o and u.  For a response (S=0) b0-b4 MUST be 0.

 

Regards,

Sanjeev