Re: CmdSN during login

["Julian Satran" <Julian_Satran@il.ibm.com>]

Sanjay,

If you want to ignore CmdSN and expedite Login processing you can do so by
having the commands being issued as immediate.
This will help us keep away from creating ambiguity about (or another
conditional) for when CmdSN is to be used or not.

Julo

Mark Bakke <mbakke@cisco.com>@ece.cmu.edu on 09-08-2001 23:55:25

Please respond to Mark Bakke <mbakke@cisco.com>

Sent by:  owner-ips@ece.cmu.edu


To:   Sanjay Goyal <sanjay_goyal@ivivity.com>
cc:   "Ips (E-mail)" <ips@ece.cmu.edu>
Subject:  Re: CmdSN during login




Sanjay-

I absolutely agree with this; CmdSN is owned by the session, and
should not be used until the connection has fully joined the session,
which means full feature phase.

This should also clean up any ambiguity on when to start
using CmdSN.

--
Mark

Sanjay Goyal wrote:
>
> Hi
>
>  Assuming Target and Initiator support multiple connections and the
session
> is having multiple connections. Assuming out-of-order CmdSN is a
possibility
> for this session.
>
>  Connection #   1       |       2       |       3
> -------------------------------------------------------
> Login Cmd  CmdSN=0      |   CmdSN=8     |  CmdSN=9
> Txt   Cmd  CmdSN=1      |               |
>                                 |               |
>                                 |               |
> Login Cmd  CmdSN=7      |  CmdSN=10     |  CmdSN=11
> -------------------------------------------------------
> Data Cmd   CmdSN=12     | CmdSN=14      | CmdSN=15
> Data Cmd   CmdSN=13     |               |
>                                 |               |
>
> CmdSN=7 is last of the Login sequence and it is acknowledged by the
Target
> with "accept login" response.
>
> Target would receive the PDUs in this CmdSN order
>  0 to 7, 8, 9, 12, 10, 11, 13, 14, 15
>
> Now as Login and Text PDUs are being processed even though you have
received
> Data Cmd PDUs, you can not pass them to iSCSI layer and hence you are
adding
> latency.
>
> What I want to convey from this example is why not use CmdSN just during
the
> FullFeature phase only.
>
> Regards
> Sanjay Goyal
>
>
----------------------------------------------------------------------------------------------------

>
>    Part 1.2    Type: application/ms-tnef
>            Encoding: base64

--
Mark A. Bakke
Cisco Systems
mbakke@cisco.com
763.398.1054