[Ips] [iscsi} Send Target Response

["Julian Satran" <Julian_Satran@il.ibm.com>]

Jacob,

David has the right answer (and you
the wrong one). See page 216 fifth paragraph.


Julo
----- Forwarded by Julian
Satran/Haifa/IBM on 30/09/2003 22:02 -----

Black_David@emc.com
Sent by: ips-admin@ietf.org

30/09/2003 21:42

To	ips@ietf.org
cc
Subject	[Ips] FW: SendTargets Response

-----Original Message-----
From: Carlos Rimola [mailto:crimola@silverbacksystems.com] 
Sent: Tuesday, September 30, 2003 2:22 PM
To: Jacob_Cherian@Dell.com; ips@ece.cmu.edu
Subject: Re: SendTargets Response

My understanding is that the proper response is an empty
PDU payload - in other words, the DataSegmentLength field in the response
header is 0.  This is the way we operate and how I have seen other
targets operate.

Carlos Rimola
Silverback Systems

At 11:07 AM 9/30/2003, Jacob_Cherian@Dell.com wrote:
What is the valid response for
SendTargets if the network entity has no targets to send.
 
I -> T         "SendTargets=ALL"
T->I           "TargetName="  
             Is this valid ?? 

Thanks, 

Jacob Cherian 
PowerVault NAS Engineering
Dell Inc. 
Ph: (512) 723 3247 
 
 

----- Forwarded by Julian
Satran/Haifa/IBM on 30/09/2003 22:02 -----

Jacob_Cherian@Dell.com
Sent by: ips-admin@ietf.org

30/09/2003 21:41

To	ips@ietf.org
cc
Subject	[Ips] RE: SendTargets Response

What is the valid response for
SendTargets if the network entity has no targets to send.
 
I    ->    T
        "SendTargets=ALL"
T   ->   I  
        "TargetName="      
          //  Is this valid ??

Thanks,

Jacob Cherian
Dell Inc.
Ph: (512) 723 3247